We could produce Monel K-500 K500 Seamless Welded Pipes Tubes Piping Tubings (UNS N05500, 2.4375, Alloy K-500 K500,NiCu30Al,NA18) from china
The type of Monel K-500, UNS N05500, 2.4375 pipes that we could do is as follows: Forged pipes, forging pipes, coiled pipes, boiler pipes, heat exchanger pipes, Capillary pipes, Thermocouple pipes, Superheater pipes and reheater pipes, condenser pipe, finned pipes, furnace pipes, instrumentation pipes, Evaporator pipes, honed pipes, Precision pipes, High pressure pipes, hydraulic pipes and so on
The outer diameter of Monel K-500, UNS N05500, 2.4375 pipes that we could do is from 0.4MM to 850MM, The thickness of Monel K-500, UNS N05500, 2.4375 pipes that we could do is from 0.12MM to 100MM
We could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of Monel K-500, UNS N05500, 2.4375 pipes, we could meet 2D finish. No. 4 Finish, No. 6 Finish, No. 7 Finish as per the requirement of the clients
We will do Positive material identification (PMI), Visual inspection, Dimensional inspection. Laser micrometer inspection, Destructive testing( includes tensile, hardness, bending, flattening, flare and metallurgical tests), ultrasonic testing and pressure testing, Liquid Penetrate testing as per the requirement of the clients to control the quality of Monel K-500, UNS N05500, 2.4375 pipes
Please send us the size and quantity of Monel K-500, UNS N05500, 2.4375 pipes that you need, we are glad to quote the best price for your side
Monel k-500
Monel K-500 Chemical composition:
| Alloy |
% |
Ni |
Cu |
Al |
Ti |
Fe |
Mn |
S |
C |
Si |
| Monle K500 |
Min. |
63 |
27.0 |
2.30 |
0.35 |
|
|
|
|
|
| Max. |
|
33.0 |
3.15 |
0.85 |
2.0 |
1.5 |
0.01 |
0.25 |
0.5 |
Monel K-500 Physical properties :
| Density |
8.44 g/cm3 |
| Melting point |
1315-1350ºC |
Monel K-500 minimum mechanical properties in the room temperature:
| Status |
Tensile strength Rm N/mm2 |
Yield strength
RP0.2N/mm2 |
Elongation
A5 % |
| Monel K500 |
1100 |
790 |
20 |
Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.
Industries Served:
gas & oil extraction
chemical processing
marine engineering
){kind=link}