We are one leading producer of Monel K-500 K500 Alloy K-500 UNS N05500 2.4375 Forging Forged Down hole Electric electrical submersible pumps ESP motor Splined Shafts(NiCu30Al, Alloy K500) factory from china.
We could produce Monel K-500, UNS N05500, 2.4375 forged/forging shafts with diameters ranging from 100MM to 1200MM, with length from 100MM to 10000MM, the weight from 10KGS to 15000KGSs
We could do rough or final machined of Monel K-500, UNS N05500, 2.4375 forged/forging shaft as per the drawing of the clients
The type of Monel K-500, UNS N05500, 2.4375 forged/fortging shafts that we could do is as follows: Forged eccentric shafts, forged crank shafts, forged pump shafts, forged generator shafts, forging shipping shafts and so on
Our Monel K-500, UNS N05500, 2.4375 forged/fortging shafts are widely used in chemical pump, centrifugal pumps, High Pressure Pump, Plunger pump. Mud pump, Fracturing Pump. Cement industry and sugar industry, paper mills. Off-highway. Shipping building and Aviation, power generation and power plants, in oil & gas industry, concrete mills and mixers, processing units, mechanical equipment.
Our Monel K-500, UNS N05500, 2.4375 forged/fortging shafts could be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN10228.
We could supply Monel K-500, UNS N05500, 2.4375 forged/fortging shafts material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party
Any inquiry of Monel K-500, UNS N05500, 2.4375 forged/fortging shafts, please feel free to contact us. We are glad to quote the best price for every clients
Monel k-500
Monel K-500 Chemical composition:
| Alloy |
% |
Ni |
Cu |
Al |
Ti |
Fe |
Mn |
S |
C |
Si |
| Monle K500 |
Min. |
63 |
27.0 |
2.30 |
0.35 |
|
|
|
|
|
| Max. |
|
33.0 |
3.15 |
0.85 |
2.0 |
1.5 |
0.01 |
0.25 |
0.5 |
Monel K-500 Physical properties :
| Density |
8.44 g/cm3 |
| Melting point |
1315-1350ºC |
Monel K-500 minimum mechanical properties in the room temperature:
| Status |
Tensile strength Rm N/mm2 |
Yield strength
RP0.2N/mm2 |
Elongation
A5 % |
| Monel K500 |
1100 |
790 |
20 |
Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.
Industries Served:
gas & oil extraction
chemical processing
marine engineering
){kind=link}