We produce Inconel X-750 spring, Inconel X750 spring, alloy X-750 spring, alloy X750 spring, UNS N07750 spring, 2.4669 spring from china.
The type of Inconel X-750, UNS N07750 2.4669 springs that we could produce is as follows:
Compression Springs, Extension Springs, Torsion Springs, tension spring, valve springs, disc spring, wave spring, Spiral Springs, Automotive Springs, coil springs, Conical Springs, die springs, Constant Force Springs, Power Springs, Volute Springs, springs, battery springs
Our Inconel X-750, UNS N07750 2.4669 springs are widely used in Condensers, Rotary Vacuum Dryers, Flavor Processing, Equipment, Slurry Tanks. Surge Tanks, Boilers & Boiler ancillary equipments. Heat Exchanger & Coils, Continuous Steam Sterilizer. Conveyor Dryer, Gass liquied Fermenters. Static Mixer. Twin Sharft Dispersers, crystalizer equipment, Wellhead and Christmas tree. Power transmission, turbine, gas compressor, gear boxes and so on
Please send us the drawing of Inconel X-750, UNS N07750 2.4669 springs that you need, we are glad to quote the best price for your side.
nconel X-750 (UNS N07750/W.Nr.2.4669)
Inconel X-750 Chemical composition:Alloy | % | Ni | Cr | Fe | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
Inconel X-750 | Min. | | 14 | 5.0 | 0.7 | | | | | | | 0.4 | 2.25 |
Max. | 70 | 17 | 9.0 | 1.2 | 1.00 | 0.08 | 1.00 | 0.5 | 0.01 | 0.5 | 1.0 | 2.75 |
Density | 8.28 g/cm3 |
Melting range | 1393-1427ºC |
Alloy | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % | Brinell hardness HB |
Solution treatment | 1267 | 868 | 25 | ≤400 |
Inconel X-750 Characteristic as below:: Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.
Inconel X-750 Machinability:
Conventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Inconel X-750 Corrosion resistance: Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media.
Incoloy X-750 Application range and field:
- Gas turbines
- Pressure vessels
- Aircraft structures
){kind=link}