We produce Monel K-500 K500 Plates/Sheets/Coils/Strips (UNS N05500, 2.4375, Alloy K-500 K500,NiCu30Al,NA18) with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.
The thickness of Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips that we could do range from 0.05MM to 3MM
The surface finish of Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips that we could do is as follows: 2B / 2D / BA
The hardness of Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips that we could do is as follows: 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft
We can polish Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Monel K-500, UNS N05500, 2.4375 plate, sheets, coils, strips can be polished on one side or two sides.
Our Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips are widely used in Chemical industry, Aerospace, Heat treating industry, Pulp and paper industry, Food processing, Nuclear Engineering, Gas turbine components and so on.
Please tell us the size of Monel K-500, UNS N05500, 2.4375 Plates/Sheets/Coils/Strips that you need, we are glad to quote the best price
Monel k-500
Monel K-500 Chemical composition:
| Alloy |
% |
Ni |
Cu |
Al |
Ti |
Fe |
Mn |
S |
C |
Si |
| Monle K500 |
Min. |
63 |
27.0 |
2.30 |
0.35 |
|
|
|
|
|
| Max. |
|
33.0 |
3.15 |
0.85 |
2.0 |
1.5 |
0.01 |
0.25 |
0.5 |
Monel K-500 Physical properties :
| Density |
8.44 g/cm3 |
| Melting point |
1315-1350ºC |
Monel K-500 minimum mechanical properties in the room temperature:
| Status |
Tensile strength Rm N/mm2 |
Yield strength
RP0.2N/mm2 |
Elongation
A5 % |
| Monel K500 |
1100 |
790 |
20 |
Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.
Industries Served:
gas & oil extraction
chemical processing
marine engineering
){kind=link}